Menu
Tap To Navigate
Enter a product, brand or topic Use 1-2 word for best results
Enter a product, brand or topic
Use 1-2 word for best results
Pro-Tec Recommend Cure Times By Color
10 Minutes @ 375° F
10 Minutes @ 350° F
10 Minutes @ 375° F
15 Minutes @ 375° F
10 Minutes @ 392° F
20 Minutes @ 375° F
10 Minutes @ 375° F
12 Minutes @ 340° F
13 Minutes @ 325° F
10 Minutes @ 392° F
10 Minutes @ 392° F
10 Minutes @ 392° F
10 Minutes @ 392° F
10 Minutes @ 392° F
10 Minutes @ 392° F
10 Minutes @ 400° F
15 Minutes @ 350° F
15 Minutes @ 385° F
12 Minutes @ 390° F
15 Minutes @ 375° F
12 Minutes @ 390° F
12 Minutes @ 390° F
Avoid The #1 Frustration In Jig Powder Painting - Prevent Painting Your Hooks With High Temperature PET Tape
Wrapping your jig hooks with high temperature HXtape before dipping or spraying will eliminate paint on the hooks, giving you a beautiful factory finish. Resisting temperatures up to 500 °F allowing you to use it painting all your lead based jigs and baits without damaging the tape.
Secrets To Keep Your Hooks Eyes Clear From Powder Paint Even When Curing In The Oven!
High Temp Masking Supply offers your solution. All you need to do is place 3/32″ Hight Temp Silicone Rubber coating caps on your hook eyes prior to dipping paint and curing in the oven. These specially designed caps resist temperature’s up to 600 °F, well above curing temps for all your lead lure needs. The caps I’ve found are reusable, however, they’re not as expensive as you think when you’re in full production and don’t want to mess around with cleaning your clogged eyes. Never use a dangerous hot paper clip again to clear your clogged eyes. Pick up 50 caps to start and see if it does not take hours off your production time!
How much area can be covered by a certain amount of Pro-Tec powder paint?
Pro-Tec Powder Paint is incredibly efficient when it comes to coverage. Without the need for a primer or gloss coat, this paint saves you money. Just a 2-oz. container of Pro-Tec Powder Paint has the capacity to cover over 450 jigs that weigh 3/8 oz. This means that for each jig, you would only need to use a fraction of the paint. To put it in perspective, based on the 2-oz. price, the cost of painting each jig would be around one cent. With its exceptional coverage, Pro-Tec Powder Paint proves to be a cost-effective solution for manufacturers and individuals alike.
How does Pro-Tec powder paint compare to other paints in terms of durability and finish?
Pro-Tec powder paints have been widely recognized by industry experts as the epitome of durability within the paint industry. Unlike other paints, Pro-Tec is packaged by weight, ensuring accurate measurement, and is conveniently housed in small jars or resealable plastic bags. What sets Pro-Tec apart is its unique formulation that eliminates the need for solvents, primers, and gloss coats. This means no waiting for drying time and no tedious mixing, resulting in a hassle-free painting experience.
The outstanding quality of Pro-Tec paints lies in their ability to achieve a brilliant, super-durable high gloss finish within seconds. With over 60 vibrant colors to choose from, it is no wonder that Pro-Tec has become the preferred choice for both tackle manufacturers and consumers worldwide. The one-coat coverage boasts a super high gloss effect, eliminating the need for a white primer. This not only saves time but also saves money, as no additional gloss coat is required.
Aside from its remarkable durability and finish, Pro-Tec powder paint excels in other areas as well. It is non-flammable and environmentally safe, ensuring peace of mind while using it. The paint’s long-lasting properties allow it to remain unaffected, preventing it from drying out or settling. Additionally, Pro-Tec exhibits no noticeable odor and offers easy cleanup, making the painting process even more convenient.
In summary, Pro-Tec powder paint surpasses other paints in terms of durability and finish due to its exceptional features. Its unique formulation and one-coat coverage guarantee a brilliant, super-durable high gloss finish without the need for additional primers or gloss coats. With Pro-Tec, painting becomes a quick and easy process that saves time and money, while also providing a non-flammable and environmentally safe solution.
How to Apply Pro-Tec Powder Paint
Stir settled powder to make it fluffy and light. Some have found that working out of a small round bowl allows for easier application. To apply PRO-TEC POWDER PAINT to jigs, hold the jig by the hook with your fingers. Preheat jigs by rotating through the flame of a torch or your gas range using a small flame. Hook will stay cool. Rotate jig in the blue part of flame for 2 seconds for 1/16 oz. jigs, 4 seconds for 1/4 oz. jigs, and so on. You may also preheat jigs in a 325 degree F oven for 15 minutes or use a cigarette lighter.
Once hot, quickly swish the jig through light powder with a side to side motion to cover the entire surface. Do not dip or push jigs into power. Remove IMMEDIATELY. The surface will then melt and gloss over. If the jig smokes, reduce the preheat time slightly. If the jig appears powdery and dry, increase the preheat time. Continue to keep the powder loose and fluffy between painting.
Your jigs are now ready for use. However, curing the lure will produce an extremely durable, chip resistant finish. Jigs may be “cured’ by hanging them in an oven at 350 degrees F for 15 minutes. Allow a few minutes for your jigs to get up to temperature. Lures with weed guards should be cured at 250 degrees F for 25 minutes. Always open the eye of the hook with a sharp object before curing.
EYES
Eyes can be painted on jigs using CS Coatings liquid vinyl lure and jig finish. Use non-fluorescent colors such as black, red or yellow. If curing the jigs, eyes must be painted on afterward.
TWO TONE JIGS
Two tone jigs can also be painted by dipping powder painted jigs in liquid vinyl paint for the second color. Since the jig now contains two coats of paint, there may be a tendency to drip if cured.
METAL FLARE GLITTER
Metal flare glitter is specially formulated for our powder paints and can add a new dimension to your lures. Mix approximately 1 part metalflake to every 10 parts of CLEAR GLOSS powder paint (adjust ratio to achieve desired results).
Immediately after applying PRO-TEC color coat, swish the still hot jig back and forth through the clear powder and metalflake mixture. This will melt over the top of the color and produce an extremely deep, high gloss glitter effect.
REMEMBER:
The powder painting technique may take a few tries to attain a desirable finish. But with a little practice, you’ll be saving time and money while creating a product of the highest quality.
- Always keep powder paint loose and fluffy.
- Use a swishing motion to cover lures completely.
- Remove jigs from powder IMMEDIATELY.
- Experiment with preheating time for best results.
- ALWAYS STORE POWDER BELOW 75 degrees F!